Description
When you’re hooking up implements and need to get that angle just right for proper ground contact, a good adjustable top link makes all the difference. This 13-inch Category 2 assembly gives you the reach and adjustment you need to dial in everything from box blades to rotary cutters. With 9 inches of adjustment range, you can handle implements of different sizes without having to guess at the setup.
What You’re Getting
- Adjusts from 18 inches closed to 27 inches extended for versatile implement matching
- Category 2 sizing with 1-inch pin diameter handles heavier implements on mid-size tractors
- Sturdy 13-inch center tube construction built to handle the stress of field work
- Standard 1-1/8 inch threading works with common replacement ends if needed
- AgSmart quality means reliable performance season after season
Built for Real Farm Work
This top link works with Category 2 three-point hitches found on tractors typically in the 40-100 HP range. Whether you’re running a 6-foot rotary cutter, pulling a disc harrow, or hooking up a box blade for driveway work, this assembly provides the solid connection your implements need. The adjustment range handles everything from compact implements to larger equipment that needs more clearance.
Made to Last
Farm work puts serious loads on three-point components, especially that top link that’s constantly adjusting to ground conditions. This assembly uses quality steel construction that won’t bend or fail under normal loads. The threaded ends are precision-made to adjust smoothly and hold their position even when working through rough terrain.
Good to Know
Installation is straightforward – just remove your old top link and thread this one into place. The left and right ends have different thread directions (one’s reverse thread), so they’ll tighten as you turn the center tube. A quick tip: back off the adjustment a turn or two from fully tight so you’ve got room to fine-tune your implement angle once it’s hooked up.
Reviews
There are no reviews yet.