Description

When you’re repairing equipment or building something new in the shop, having the right fastener makes all the difference. This 5/8-inch hex cap screw gives you the strength and reliability you need for medium to heavy-duty connections on tractors, implements, and shop-built projects. The 2-1/2-inch length is perfect for bolting through thicker material or when you need to sandwich multiple pieces together.

What You’re Getting

Grade 5 strength that’s 25% stronger than standard hardware store bolts
Zinc coating protects against rust and corrosion in wet conditions
UNC thread pitch for compatibility with standard nuts and threaded holes
Professional-grade quality that holds up to farm work and vibration

Built for Real Farm Work

You’ll find 5/8-inch bolts throughout agricultural equipment – holding loader mounts to tractors, securing cultivator frames, and assembling three-point hitch components. This size hits the sweet spot for connections that need real strength without being overkill. Whether you’re fixing a broken bracket or building custom equipment, this bolt handles the job.

Made to Last

Grade 5 bolts offer the perfect balance of strength and cost-effectiveness for farm use. The zinc plating helps them stand up to moisture, road salt, and the general abuse that farm equipment takes. They won’t rust out on you after a season or two like cheaper bolts will.

Good to Know

Always use flat washers under both the head and nut to distribute the load properly and prevent the bolt from pulling through. If you’re replacing rusty bolts, clean out the threads with a tap first. A little anti-seize compound on the threads makes future removal much easier, especially if the connection might see heat or road chemicals.