Description

When your three-point hitch won’t hold implements level or you’re fighting to get everything lined up just right, it’s usually your top link that’s the culprit. This adjustable Category 2 top link with ball ends gives you the precise control you need to get implements positioned exactly where they work best. Whether you’re running a heavy disc that needs to cut evenly or setting up a finish mower to follow ground contours, having the right top link length makes all the difference between a job well done and doing it over.

What You’re Getting

Adjusts from 530mm to 720mm so you can dial in the perfect angle for any implement
Ball ends let implements articulate naturally over uneven ground without binding up
Category 2 rating handles the heavy stuff – discs, plows, and big tillers won’t overload it
Spring-loaded adjustment locks securely but releases quickly when you need to make changes

Built for Real Farm Work

John Deere 6M series tractors are workhorses in the 105-170 horsepower range that see everything from heavy tillage to precision planting. These machines spend their days pulling implements that demand accurate positioning – moldboard plows that need consistent depth, cultivators that must stay centered, and rotary cutters that have to maintain proper cutting height across varying terrain.

Made to Last

This isn’t some lightweight substitute – it’s built to Category 2 specifications with high-strength steel that won’t bend under load. The ball joints are precision-machined to move smoothly without excessive play, and the whole assembly is finished to resist the rust and corrosion that come with farm life.

Good to Know

Installation is straightforward – just remove your old top link and thread this one in place. Start with the adjustment somewhere in the middle of its range so you have room to go either direction when fine-tuning. Keep the ball joints greased and check that the locking mechanism engages fully after each adjustment.