Description
When you’re building hydraulic hoses or repairing hydraulic systems on your tractor, you need fittings that seal properly and hold up under pressure. This Ryco DKOL female fitting gives you the reliable connection your equipment demands, whether you’re replacing a leaky hose end or building a custom assembly for your loader or three-point hitch.
What You’re Getting
- 24-degree cone seat creates a metal-to-metal seal that handles high pressure without leaking
- Female M14x1.5 metric threads fit common European tractor hydraulic ports
- Designed for 1/4 inch inner diameter hose with 6mm tube size
- Crimp-on design provides a permanent, secure connection that won’t pull apart under load
- O-ring groove ensures proper sealing when properly assembled
Built for Real Farm Work
This DKOL fitting is commonly found on European tractors and implements, especially Deutz, Same, Lamborghini, and other brands that use metric hydraulic connections. Whether you’re working on auxiliary hydraulic circuits, loader systems, or remote hydraulic outlets, this fitting provides the proper connection for metric hydraulic systems that operate at working pressures typical in agricultural equipment.
Made to Last
As part of Ryco’s T200 Bitelok series, this fitting is built to handle the pressure cycles and vibration that hydraulic systems see in farm service. The precision-machined cone seat and quality materials ensure a leak-free connection that maintains system pressure even after thousands of operating hours.
Installation Notes
This is a crimp-on fitting that requires proper hydraulic crimping equipment and the correct die set for installation. Make sure to use the 21mm cutoff allowance when preparing your hose. The DKOL threads seal with the 24-degree cone, so don’t over-tighten—just snug them up until the cone seats properly.
Reviews
There are no reviews yet.