Shaft Weld Yoke for 1-5/16 Square Shaft 2600 Series PTO Drivelines

Description

When you need to rebuild or fabricate a custom PTO driveline, the yoke that connects your shaft to the universal joint better be tough enough to handle whatever you throw at it. Weasler doesn’t mess around – their yokes are forged tough and machined to tight tolerances. This tube weld yoke is built from quality steel that can handle the constant stress of PTO operation, from the shock loads of engaging implements to the vibration of field work. This 2600 series shaft weld yoke fits 1-5/16 inch square shafts and gives you the foundation for a reliable driveline repair or custom build.

What You’re Getting

• Precision-machined bore fits 1-5/16 inch square shafts with no slop or binding
• Forged construction handles shock loads and constant torque without cracking
• Ready-to-weld design lets you build exactly the driveline length you need
• The bearing surfaces are precisely machined to work smoothly with 14 series universal joints
• 2600 series strength for mid-range horsepower applications

Built for Custom Driveline Work

Whether you’re working on mower drivelines, post hole digger shafts, or custom implements, this tubing provides the backbone for reliable power transmission. The 1-1/4 inch square profile is commonly used in mid-range horsepower applications where you need strength without excessive weight. This yoke works perfectly for tractors in the 30-70 horsepower range running implements like rotary cutters, tillers, and hay equipment that need solid power transfer without the bulk of heavier series.

Made to Last

Weasler builds this tubing to handle the constant torque loads and vibration that come with farm work. The steel construction resists fatigue cracking and maintains its shape under load. It’s designed to work with standard universal joints and yokes, so you’re not stuck hunting for special components. This isn’t a hardware store part – it’s agricultural-grade all the way through.

Installation Notes

Welding this yoke requires proper preparation – clean the tubing end thoroughly and ensure square cuts for the best fit. When cutting to length, use a cutoff saw for clean, square cuts that fit properly in yokes. File or grind any burrs smooth to prevent premature wear on seals and joints. A good tip: tack weld first, check your alignment with the rest of the driveline, then finish the welds.