Description

When you’re running equipment day in and day out, those grease fittings take a beating. Dirt gets packed in them, implements smack them against fence posts, and eventually they won’t take grease anymore—leaving your bushings and pins to run dry. This pack of 20 grease fittings gives you the replacements you need to keep everything properly lubricated and running smooth.

What You’re Getting

Twenty 1/2-inch threaded grease fittings ready to install
Standard thread size that fits most agricultural equipment lubrication points
Quality construction that stands up to grease gun pressure and field conditions
Direct replacements for worn, damaged, or missing fittings on implements and tractors

Built for Real Farm Work

These fittings work on just about any piece of equipment with 1/2-inch grease points—cultivators, disk harrows, planters, hay equipment, and loader attachments. Whether you’re maintaining pivot bushings on a field cultivator or keeping the pins greased on a hay rake, having a supply of fresh fittings on hand means you can stay on top of lubrication instead of running dry bearings.

Made to Last

Agricultural grease fittings need to handle hundreds of pounds of pressure from your grease gun while dealing with mud, dust, and the occasional impact. These fittings are built to take the abuse and keep sealing properly so grease goes where it’s supposed to instead of leaking out around worn threads.

Installation Notes

Thread them in hand-tight plus a quarter turn with a wrench—don’t overtighten or you’ll crack the housing. Clean out the old threads with a wire brush if they’re packed with dirt. Keep a few extras in your toolbox since you’ll always need them when the parts store is closed.