JIC Male Straight Crimp Fitting for 3/8 Inch Hydraulic Hose

Description

When you’re making hydraulic hose assemblies for your tractor or equipment, you need fittings that won’t fail when the pressure’s on. This JIC male straight fitting crimps securely to 3/8-inch hydraulic hose, giving you a reliable connection that handles the demands of farm work without leaks or blowouts. It’s the kind of fitting you can trust when you’re running high-pressure implements or loader circuits.

What You’re Getting

• JIC male threads (7/8-14) that mate perfectly with standard hydraulic fittings
• Parker 43 Series quality construction built for agricultural applications
• Straight rigid design that won’t twist or move under pressure
• Crimp-on attachment that creates a permanent, secure connection to your hose
• 37-degree flare sealing surface that prevents leaks even at high pressures

Built for Real Farm Work

This fitting works perfectly on 3/8-inch hydraulic hoses used throughout farm equipment – from loader circuits and remote hydraulic outlets to implement connections and hydraulic motor feeds. Whether you’re building custom hoses for tractor hydraulic systems or replacing damaged fittings on existing assemblies, this straight male connector gives you the reliable performance you need for everything from running a post hole digger to operating hydraulic chutes.

Made to Last

Parker’s 43 Series fittings are built specifically for the demanding world of mobile hydraulics where vibration, pressure spikes, and constant use put fittings to the test. The precision-machined threads and quality steel construction hold up season after season, while the proper crimp attachment distributes stress evenly so the connection stays strong even when hoses flex and move during operation.

Good to Know

This is a crimp-style fitting, so you’ll need the right crimper and dies to install it properly – a loose crimp is a recipe for failure. Make sure your hose is cut square and clean before crimping, and double-check the crimp diameter against Parker’s specifications. The JIC threads use a metal-to-metal seal, so no thread sealant is needed – just hand tighten plus one full turn with a wrench.