SAE Male Inverted Flare Fitting for Hydraulic Hose Connections

Description

When you’re making hydraulic connections on your tractor or equipment, you need fittings that create tight, leak-free seals under pressure. Those thin-walled fittings weren’t designed to handle stress, and once they’re damaged, you’re looking at a much bigger repair job. This SAE male inverted flare fitting gives you the reliable connection you need for 1/4 inch hydraulic hose systems with its precision 7/16 inch thread.

What You’re Getting

• SAE inverted flare design creates a positive metal-to-metal seal that won’t leak under hydraulic pressure
• 7/16 inch male threads fit standard hydraulic system ports found on most tractor brands
• Designed specifically for 1/4 inch hydraulic hose – no guessing about compatibility
• Crimp-on attachment gives you a permanent connection that won’t work loose
• Ryco T2000 series quality built for agricultural hydraulic applications

Built for Farm Hydraulic Work

This fitting works with hydraulic hose assemblies found on loaders, remote hydraulics, and other tractor systems where you need reliable pressure connections. When connecting hydraulic lines on your tractor or implement, O-ring boss and SAE fittings create reliable, leak-free seals every time. Whether you’re plumbing cylinders on a three-point hitch implement or connecting remote hydraulic circuits, this fitting handles the connections that keep your equipment working.

Made to Last

Farm hydraulic systems run high pressure and deal with constant vibration, temperature swings, and contamination. Steel fittings with proper sealing prevent the leaks that lead to bigger problems. This Ryco fitting is built to agricultural standards, not lightweight applications that fail when you need them most.

Installation Notes

This is a crimp-on fitting that requires proper crimping equipment to attach to your hose. Make sure your hose is cut square and clean before crimping. Thread the fitting into your hydraulic port hand-tight, then snug it down with a wrench – don’t over-torque and crack the fitting.