Description

When you’re prepping seedbeds or breaking up clods after harvest, having working spring board assemblies on your harrow makes all the difference. This 30-inch assembly keeps your tines at the right angle and tension, letting them flex over rocks and obstacles while still doing their job breaking up compacted soil. If you’ve noticed your harrow isn’t finishing as smooth as it used to, worn spring boards could be the culprit.

What You’re Getting

Full 30-inch spring board assembly ready to bolt on and get back to work
1-3/4 inch width provides the right spring tension for consistent field performance
AgSmart quality construction built to handle the constant flexing and stress of field work
Direct replacement that fits multiple harrow brands without modifications

Built for Real Farm Work

This spring board assembly fits John Deere finishing harrows (models 400, 600, 610, and 810), Noble Do-All units, Case IH harrows (models 468 and 568), and Wil-Rich seedbed finishers. Whether you’re working behind a disc to break up clods or doing final seedbed prep before planting, these machines need reliable spring assemblies to get the job done right.

Made to Last

Spring boards take a beating—they’re constantly flexing as tines hit rocks, stumps, and hard ground. This assembly is built with quality steel that maintains its spring tension season after season. The 30-inch length and proper width ensure it’ll handle the stress without breaking or losing its flex.

Good to Know

Installation is straightforward—just remove the old assembly and bolt this one in place. Check your tine mounting while you’re at it, and make sure all hardware is tight. A quick tip: if you’re replacing one spring board, it’s worth checking the others on that section since they tend to wear at similar rates.