Description
When you need to route hydraulic lines around tight spaces or make connections at awkward angles, a good 45-degree elbow can save the day. This ORFS swivel fitting gives you that perfect angle while letting the hose rotate freely during installation – no more wrestling with twisted lines or trying to force connections that just won’t cooperate.
What You’re Getting
- 45-degree angle cuts routing distance and eliminates sharp bends that stress hoses
- Swivel design rotates freely so you can orient the hose exactly where you need it
- ORFS (O-Ring Face Seal) connection provides reliable, leak-free performance
- Crimp-on design creates a permanent, strong connection that won’t work loose
- Heavy-duty construction handles the pressure and vibration of farm equipment
Built for Real Farm Work
This fitting works with standard 1-inch hydraulic hose and connects to 1-11/16 inch x 12 thread ORFS ports. You’ll find these connections on loaders, implements, and hydraulic remotes throughout the farm. The 45-degree angle is particularly handy when you’re working in tight spots where a 90-degree fitting is too sharp and straight fittings leave you with kinked hoses.
Made to Last
The ORFS design uses an O-ring sealed against a flat surface for a positive seal that doesn’t rely on thread interference. This means consistent sealing even with repeated connections and disconnections. The crimp-on attachment creates a mechanical bond that’s stronger than the hose itself when properly installed.
Installation Notes
This fitting requires a hydraulic hose crimper with the correct dies for your hose size. Make sure your hose cut is square and clean before crimping. The swivel feature lets you orient the fitting after crimping, so you don’t have to worry about perfect positioning during assembly. Always test the completed assembly at working pressure before putting it into service.
Reviews
There are no reviews yet.