Description

When you’ve got implements that just won’t match up to your tractor’s PTO, you know that sinking feeling—time’s burning and work needs doing. This PTO adapter solves that common problem by connecting a 10-spline implement or driveline to a standard 6-spline tractor output. Whether you’re dealing with different equipment generations or brands that use different spline counts, this handy adapter gets everything talking to each other properly.

What You’re Getting

1-3/8 inch inside diameter female end accepts 10-spline shafts securely
1-3/8 inch male end with 6 splines fits standard tractor PTO outputs
Precision-machined splines ensure maximum contact and power transfer
3-inch overall length provides proper spacing without extending too far
Heavy-duty steel construction handles the torque loads from agricultural work

Built for Real Farm Work

This adapter handles the everyday challenges of running mixed equipment on your operation. Maybe you’ve got an older implement with 10-spline driveline that needs to work with your current tractor, or you picked up some equipment at auction that doesn’t quite match your setup. Either way, this adapter bridges that gap so you can keep working without expensive modifications or custom parts.

Made to Last

Farm equipment takes a beating, and PTO adapters see some of the heaviest stress on your tractor. This one’s built from quality steel and machined to tight tolerances so it handles shock loads and constant torque without slipping or wearing prematurely. The splines stay sharp and true, maintaining that solid connection season after season.

Installation Notes

This slides right into place—female end accepts your 10-spline shaft while the male end goes onto your tractor’s 6-spline PTO. Clean both connections thoroughly before installation and check that everything engages fully. A light coat of grease on the splines prevents corrosion and makes future removal easier if needed.