Cross DB Series Hydraulic Cylinder with 30-Inch Stroke

Description

When you need reliable hydraulic power for your equipment, there’s nothing worse than a cylinder that can’t hold its pressure or takes forever to cycle. This Cross DB series hydraulic cylinder delivers consistent 2500 PSI performance with a 30-inch stroke that gives you the reach and power for everything from loader work to implement operation. The welded construction means it’s built to handle the punishment of daily farm work.

What You’re Getting

• 2-1/2 inch bore with 1-1/4 inch rod delivers plenty of force for heavy lifting and pushing
• 30-inch stroke gives you maximum extension for loader buckets, snow pushers, and implements
• 3/8 NPT ports make plumbing connections straightforward with standard hydraulic fittings
• 1-inch clevis pin holes fit standard implement attachment hardware
• 2500 PSI rating handles the demands of most tractor hydraulic systems

Built for Real Farm Work

This cylinder is designed to work with Cross hydraulic cylinders found on implements and equipment throughout the farm. Whether you’re working with a front-end loader, running a hay baler, or operating a grain cart, these cylinders handle the heavy lifting on everything from mid-size utility tractors to larger row-crop machines. The 30-inch stroke makes it perfect for applications where you need maximum reach and extension.

Made to Last

This isn’t some lightweight replacement part—it’s built to the same standards as your original clevis. Cross manufactures these components to handle the constant stress of hydraulic systems, so you can count on it holding up through busy seasons and tough conditions. The welded construction eliminates the tie-rod failure points that can cause problems in the field.

Installation Notes

This cylinder drops right into place with standard hydraulic connections and clevis pins. The 40-1/4 inch closed center-to-center dimension makes it a direct replacement for many OEM applications. Make sure your system pressure doesn’t exceed 2500 PSI, and always use proper hydraulic fluid for your operating temperature range.