Description

When you’re rebuilding a disc gang or replacing a bent axle after hitting that buried fence post, you need a quality replacement that’ll handle the side loads and stress that come with cutting through tough residue. This 1-1/8 inch square axle at 94.6 inches long gets your Case IH disc harrow back to work without any guesswork about fit or durability.

What You’re Getting

Heavy-duty square steel construction that resists bending under side loads from disc gangs
Proper 1-1/8 inch square dimensions for tight fit with your disc blades and spacers
Threaded ends with 2-3/4 inch thread length for secure gang assembly
Direct replacement design – no modifications needed to existing disc hardware

Built for Real Farm Work

This axle fits Case IH disc harrows including models 122, 132, 350, 370, 3800, 3850, 475, 480, 485, 496, 501, 596, 760, and 770 – machines that see heavy use breaking down corn stalks, chopping wheat stubble, and incorporating cover crops. Whether you’re running a smaller tandem disc or a big offset, this axle handles the demands of serious tillage work.

Made to Last

Farm disc axles take a beating from constant flexing, impact loads, and the torque created by spinning disc gangs. This axle is built from quality steel that won’t snap under stress or wear out of square from repeated loading. The threaded ends are properly heat-treated to prevent stripping when you torque the gang nuts down tight.

Good to Know

When installing, make sure your disc gangs are properly spaced and balanced before final tightening. A good tip is to check that your bearing housings are square to the axle – crooked bearings cause premature wear. The compatible nut has 1-1/8-7 threads, so make sure you’ve got the right hardware before starting the job.