Description
When you need a replacement bearing housing for your equipment’s rotating shafts, this stamped steel pillow block gets the job done without breaking the bank. Whether it’s a conveyor, auger, or PTO-driven attachment that’s giving you trouble, a worn-out housing can turn a simple maintenance job into a headache. This housing gives you a reliable mount for your insert bearings and gets you back to work.
What You’re Getting
- Fits standard 202 series insert bearings for common 40mm shaft applications
- Two-hole mounting design with 2.68-inch bolt spacing for secure attachment
- Stamped steel construction that’s lighter than cast iron but still plenty strong
- Greasable design keeps your bearings lubricated and running smooth
- Direct replacement housing that bolts right in without modifications
Built for Real Farm Work
This housing works great on grain handling equipment, feed mixers, manure spreaders, and other machinery where you need to support rotating shafts. The 40mm size is common on mid-sized equipment where you need something beefier than the smaller housings but don’t need the bulk of the bigger ones. You’ll find this size on everything from auger drives to conveyor rollers.
Made to Last
The stamped steel construction handles the vibration and loads you’ll see in farm applications while keeping the weight down. It’s built to work with standard grease fittings so you can keep things lubricated during regular maintenance. The two-bolt mounting gives you solid support without being overbuilt for the job.
Good to Know
Make sure you match your insert bearing series before ordering – this one’s made for 202 series bearings. When installing, check that your mounting holes line up with the 2.68-inch spacing. A little anti-seize on the bolts makes future removal easier if you ever need to swap things out again.
Reviews
There are no reviews yet.