Description

Nothing stops your day faster than breaking a hitch pin in the middle of connecting an implement. When you’re hooking up a heavy disc, manure spreader, or big baler, you need a pin that won’t bend or break under pressure. This solid steel hitch pin with a fixed handle is built to handle the tough connections that keep your operation running.

What You’re Getting

1-inch diameter and 6-3/4 inch usable length for heavy-duty applications where strength matters
SAE Grade 5 steel construction that’s tougher than standard hardware store pins but won’t break the budget
Fixed handle design gives you a solid grip for insertion and removal without needing pliers or hammers
10-17/32 inch overall length with solid handle that won’t snap off when you need it most
Round wire construction fits standard hitch holes and pivot points cleanly

Built for Real Farm Work

This pin size is what you’ll find on larger agricultural implements like Category 2 three-point hitches, heavy pull-type equipment, and substantial trailer tongues. Whether you’re connecting a 15-foot disc harrow to a big tractor or hooking up a manure spreader for the day’s work, this pin handles the loads and stresses that come with serious farming equipment.

Made to Last

Grade 5 steel offers the sweet spot between strength and cost—about 25% stronger than standard hardware store bolts but practical for everyday farm use. The solid construction resists bending even when side loads try to twist it, and the fixed handle is welded on permanently so you won’t be left with a useless stub after hard use.

Good to Know

The 1-inch diameter makes this pin suitable for heavy-duty connections where smaller pins just won’t cut it. Keep the pin lubricated if you’re using it in a pivot application, and always check that it’s fully seated through both sides of the connection. A quick visual check before you start moving saves headaches later.