Description

When you’re working with hydraulics on your tractor or implement, you need hoses that can handle the pressure and keep the fluid flowing where it needs to go. This 72-inch assembly gives you the length to reach from your tractor’s hydraulic outlets to front-end loaders, tillers, or other implements without coming up short. The rigid NPT ends thread right into your fittings and won’t work loose under pressure.

What You’re Getting

Durable 2-wire construction handles medium-pressure hydraulic systems up to 2,250 PSI
Male NPT threads on both ends for secure connections that won’t leak
6-foot length works great for front implements and most loader applications
Rigid ends eliminate the hassle of trying to get threaded fittings seated properly
AgSmart brand quality that meets OEM specifications

Built for Real Farm Work

This hose is sized right for most utility and compact tractors running loaders, tillers, post hole diggers, and other hydraulic implements. The 1/2-inch diameter handles good flow rates for cylinders and motors while the 72-inch length gives you room to maneuver without binding or kinking when you’re working tight spots around the farmyard.

Made to Last

The 2-wire reinforcement gives you a good balance of flexibility and strength for everyday farm use. The rubber compound resists weather, hydraulic fluid, and the kind of abuse that comes with outdoor work. These hoses are built to handle the pressure spikes that happen when you’re moving heavy loads or working hydraulic cylinders hard.

Good to Know

Before installing, make sure your hydraulic system is depressurized and clean any debris from the threads. Hand-tighten the fittings first, then use wrenches to snug them down—don’t over-tighten or you’ll damage the threads. Keep a spare on hand since hydraulic hoses always seem to fail at the worst possible time.