Description
When you’re building or repairing hydraulic hoses for your loader, tractor remotes, or any hydraulic implement, you need fittings that create rock-solid connections without the guesswork. This Weatherhead crimp fitting takes the worry out of hydraulic connections with its dual flare capability—it’ll mate with both SAE 37-degree and 45-degree fittings, so you don’t have to stress about which angle you’re dealing with.
What You’re Getting
- Dual flare design works with both 37-degree and 45-degree SAE fittings
- Female swivel end rotates freely to prevent hose twisting and stress
- Coll-O-Crimp design with insert and outer sleeve for secure crimped connection
- Low carbon steel construction with zinc plating for corrosion resistance
- SAE J533 certified for quality and reliability you can count on
Built for Real Farm Work
This fitting is designed for the hydraulic systems that power your farm equipment—from loader circuits and three-point hydraulics to remote valve connections that run everything from post hole diggers to hydraulic chutes. The 1/2-inch size handles the flow rates you need for serious hydraulic work while the swivel feature prevents those kinked hoses that always seem to fail at the worst possible moment.
Made to Last
Weatherhead has been making hydraulic fittings for decades, and this one shows why they’re trusted by farmers and mechanics worldwide. The low carbon steel construction handles high pressures without cracking, while the zinc plating resists the rust and corrosion that comes with outdoor use and hydraulic fluid exposure.
Installation Notes
You’ll need a hydraulic crimping tool to install this fitting properly—the insert slides into the hose while the outer sleeve compresses around it for a leak-free seal. Make sure your hose ends are cut square and clean before crimping. Once crimped, the connection is permanent and stronger than the hose itself.
Reviews
There are no reviews yet.