Description
When you’re setting up water systems, hydraulic lines, or air compressor plumbing around the shop, you’ll often need to connect pipes of different sizes. This 1-1/2 inch to 1 inch reducer bushing handles that job perfectly, giving you a solid connection that won’t leak or back out under pressure. It’s one of those handy fittings you’ll find yourself reaching for again and again.
What You’re Getting
- Male pipe threads on the outside (1-1/2 inch) screw into larger fittings
- Female pipe threads on the inside (1 inch) accept smaller male fittings
- Hot-dip galvanized coating resists rust and corrosion in wet conditions
- Heavy-duty construction handles pressure from water lines, air systems, and hydraulics
Built for Real Farm Work
This fitting shines when you’re plumbing water tanks, connecting different sizes of pipe in irrigation systems, or adapting hydraulic fittings on equipment. The galvanized finish holds up well to weather, chemicals, and the general abuse that farm plumbing takes. You’ll find uses for it everywhere from the shop air compressor to livestock water systems.
Made to Last
The galvanized coating isn’t just for looks—it adds years of life compared to plain steel fittings. The threads are cut clean and deep, so they’ll seal tight with pipe dope or thread tape and stay that way through temperature changes and vibration.
Good to Know
Use quality pipe thread compound or Teflon tape for the best seal. The male threads go into your 1-1/2 inch fitting, then whatever you’re connecting screws into the 1 inch female threads inside. Hand-tighten first, then use a pipe wrench for the final snug-up—don’t overtighten or you might crack the fitting.
Reviews
There are no reviews yet.